欧美日韩视频在线视频二区-色婷亚洲五月在线观看-国产免费内射又粗又爽-国产日韩精品在线播放

Glenn Wilson

An Automotive Engineer with more than 35 years’ industry experience. He is part of Shell’s Engine and Vehicle Technology team and has been working with Shell V-Power fuels since the early days of the development programme.

Just as you and I need our “five a day” to stay healthy, your car or bike’s engine also needs a good diet.

Glenn Wilson is an Automotive Engineer who has worked for Shell for over 25 years. His wealth of experience has made him something of an engine nutritionist, and he knows exactly what their diets should consist of.

The key to developing our best performance fuel is the understanding of what goes on right at the heart of the engine: the interaction between the fuel and the engine components. You want your car to perform and fuel choice can play a big role.

But how does Shell V-Power Nitro+ work? We asked Glenn to guide us through the anatomy of an engine.

The Combustion Chamber

The heart and lungs of the engine, where air is sucked in and combined with fuel before being tumbled, swirled, compressed, burnt and then released to exhaust. It’s known as the four-stroke Otto cycle.

In petrol engines, the spark plug initiates combustion giving a smooth burn that develops pressure, forcing the piston down. However, under high pressure and temperature some petrol fuels can show a tendency to combust spontaneously. This can result in a ‘knocking’ or ‘pinking’ sound as small erratic bursts of combustion occur. As a result, an engine may suffer from depleted performance and in the most severe cases permanent damage can occur. Petrol’s octane rating is a measure of how well the fuel can resist this knocking.

“Timing the combustion is critical to effective energy transfer from the burning fuel to the engine. A higher octane quality allows for an earlier spark, which means the piston can be pushed down more effectively and for longer,” says Wilson.

Car engine with fuel injectors

Fuel Injectors

It is the job of the fuel injector to ensure that the fuel is dispersed and mixed into the air in the exact pattern and volume required. In a diesel engine, they have to inject high-pressure fuel through holes no thicker than a human hair.

Some fuels can lead to fouling of the injector holes, which can disrupt the spray pattern, resulting in poor combustion and power loss. “Diesels can be particularly vulnerable to injector deposits and that can really affect the spray pattern,” says Wilson.

Shell V-Power Nitro+ Diesel is designed to restore and maintain engine power through active engine protection.

Car engine's inlet valves

Inlet Valves

These perform the job of opening and closing several hundred times a minute to, depending on engine design, allow the air, or the air/fuel mix, into the combustion chamber. In a conventional port fuel injected petrol engine, inlet valves can be prone to deposit formation, which can have potentially disruptive effects.

“If petrol inlet valves have been prone to deposit formation, you can end up with an engine that runs lean under acceleration, so you have less available power and a poorer response,” says Wilson.

Shell V-Power Nitro+ is designed to instantly get to work in your engine on deposits which can reduce performance.

Piston Rings

The piston rings are designed to form a seal between the piston and the cylinder wall and slide up and down the cylinder bores several thousand times a minute.

“Inside an engine is a tough place to be, especially at the top and the bottom of the stroke where the piston speed is effectively zero. It is difficult to maintain lubrication and friction can occur between the piston rings and cylinder walls,” says Wilson.

The interface between these components is difficult to lubricate.? The rings must form a tight seal to prevent lubrication oil from getting into the combustion space, which could lead to increased engine emissions, and to prevent combustion gases from entering the crankcase.

This is where we see another unique element of Shell technology: “Shell V-Power Nitro+ contains Friction Modification Technology (FMT) which is designed to reduce friction in key engine areas, specifically in the piston assembly. In this way, it helps the engine to turn more freely thereby unlocking valuable energy which can lead to improved acceleration and power delivery. This is just one example of how learning from the technical partnership with Scuderia Ferrari can benefit Shell customers.”

More in Motorists

Anatomy of an engine: Heart condition

The four-stroke engine was first patented nearly 150 years ago, and a lot has changed since then. We attempt to explain what happens to your fuel when modern engines get to work.

10 Safety tips

Follow the advice of Don Palmer and you could become a better, safer driver.

日韩黄片大全免费在线看| 久久99精品日韩人妻| 五月综合激情婷婷丁香| 熟女一区二区三区国产| 国产女同精品一区二区| 久久女同精品一区二区| 精品国产一区二区欧美| 欧美做爰猛烈叫床大尺度| 国产又爽又猛又粗又色对黄| 久久青青草原中文字幕| 亚洲精品偷拍一区二区三区| 亚洲精品中文字幕欧美| 日韩精品中文字幕亚洲| 色小姐干香蕉在线综合网| 日韩av生活片一区二区三区| 一区二区欧美另类稀缺| 好吊妞视频只有这里有精品| 国产熟女一区二区不卡| 欧美激情视频一区二区三区| 免费在线播放一区二区| 九九热在线免费在线观看| 暴力性生活在线免费视频| 午夜视频免费观看成人| 欧美日韩中国性生活视频| 国产一区二区三区丝袜不卡| 国产欧美日韩在线一区二区| 国产免费操美女逼视频| 天堂网中文字幕在线视频| 精品一区二区三区中文字幕| 91在线播放在线播放观看| 日韩欧美亚洲综合在线| 亚洲精品中文字幕欧美| 亚洲黄色在线观看免费高清| 在线观看视频国产你懂的| 国产又色又爽又黄又免费| 91精品日本在线视频| 午夜国产成人福利视频| 免费午夜福利不卡片在线 视频| 好吊妞视频免费在线观看| 亚洲男人天堂网在线视频| 色哟哟哟在线观看视频|